Tilling rotor
Tractor
Hiller
Ridge scoop
Ridger
Leveling rake
Traveling attachment
Implement connection hitch
Hiller
Ridge scoop
Ridger
Leveling rake
Wheel
Ridge scoop
Hiller
Ridger
 
 
Plowing work
Furrow-opening work 1
Furrow-opening work 2
Plowing work
Double hilling-up work 1
Single hilling-up work 1
Double hilling-up work 2
Single hilling-up work 2
Ridging/intertillage ridging work
Soybean/black bean soil-covering work
Leek-related
Mowing/residual stem treating work
 

Attachments for professional farmers
 

 Mowing/weeding



Mowing/residual stem treating workMowing/residual stem treating work
・・・  Mowing work and residual stem treating work for vegetables with a 5 to 9PS class two-wheel general-purpose tending machine


 
● Grass cutter --- Mowing work and residual stem treating work for vegetables can be performed when set to the rotary of a 5 to 9PS class two-wheel general-purpose tending machine.


(Product photo)
 
   
(Photo of setting to a main machine)
 

Mowing work 


Residual stem treating work for vegetables   



[Use]  ・・・ 1. Mowing work (vacant lot, idle farmland, etc.)
2. Residual stem treating work for vegetables (cabbage, Chinese cabbage, broccoli, etc.)
[Spec]  ・・・ Rotor diameter 36cm, working width 70cm
[Features]  ・・・ 1. The cost is lower than a dedicated mowing machine due to use as an attachment to a general-purpose tending machine (5 to 9PS).
2. As the cutting blades are L-shaped free knives to finely pulverize the residual stems of grass and vegetables; therefore, time for grass gathering and incineration, etc., can be saved. The cutting height can be easily adjusted by raising and lowering the press wheel in front.
3. Stable work can be performed as the cutting width is as large as 70cm.
4. The cutting blades of the grass cutter can dig into the ground 2 to 3cm to allow cutting of grass at the roots, so that growth is retarded.
5. The cutting blades can be doubly used by interchanging the right and left rotors.
[Points for work]  ・・・ 1.
Work with the handle of the main machine turned to make the rotary (cutting blade section) move ahead.
2. Work with the rotary rotated at high speed.
3. Work in first to third gears, adjusting the speed according to the amount of residual stems of grass and vegetables.
[Note]  ・・・ Some products do not match depending on the rotary of each manufacturer's tending machine.


Blue spiral 650

Blue spiral 650 Blue spiral 650

[Use] ・・・ Mowing/weeding work
[Working width] ・・・ 65cm
[Features] ・・・ 1. Work is smooth with little vibration.
2. Grass hardly becomes entangled in the center of the axle shaft during removal of long grass.
3. Little soil and grass adhere to both ends of the spiral blade.
4. Even dense grass can be removed by roots through the adoption of the specially-shaped side plate.
5. The newly-adopted "KARAMAN collar" prevents grass from becoming entangled in the axle shaft.


Blue spiral 750

Blue spiral 750 Blue spiral 750

[Use] ・・・ Mowing/weeding work
[Working width] ・・・ 75cm
[Features] ・・・ 1.
Work is smooth with little vibration.
2. Grass hardly becomes entangled in the center of the axle shaft during removal of long grass.
3. Little soil and grass adhere to both ends of the spiral blade.
4. Even dense grass can be removed by roots through the adoption of the specially-shaped side plate.
5. The newly-adopted "KARAMAN collar" prevents grass from becoming entangled in the axle shaft.


Yellow spiral 450

Yellow spiral 450 Yellow spiral 450

[Use] ・・・ Mowing/weeding work
[Working width] ・・・ 45cm
[Features] ・・・ 1. Work is smooth with little vibration.
2. Little soil and grass adhere to both ends of the spiral blade.
3. Even dense grass can be removed by roots through the adoption of the specially-shaped side plate.